Vehicles Evacuated from the Scene after the Accident
Chapter 7 · Manual page 311
If a vehicle requires removal or recovery please observe the following instructions: When transporting the vehicle, place wheel chocks (1) as shown in the figure, and then position the anti-slip rubber blocks (2) around the wheel. Meanwhile, fit the lashing straps (3) around the wheels and secure them to the trailer. Fasten the straps to secure the vehicle.
In some cases where the vehicle has broken down or suffered a minor accident, you can use the towing hook to tow your vehicle, such as towing your vehicle onto the transporter. The towing hook is not designed for towing other vehicles. It is recommended to tow the vehicle using a solid rod, and if it is not available, a soft rope may be used. Suspended towing is the best method for recovering a vehicle that needs to be towed. The drive wheels should be suspended above the ground, or the transmission may be damaged. Switch on the hazard warning lamps and ensure no passengers are in the towed vehicle.
- Only when there is no safety risk to the vehicle can it be towed away from the site. If the vehicle battery pack is deformed, leaking or smoking, the safety risk should be eliminated first.
- Before transporting the vehicle, ensure that the parking system is enabled.
- Before towing the vehicle, switch on the hazard warning lamps, close and lock the doors.
- When towing the vehicle, DO NOT suddenly accelerate or brake suddenly, this can cause accidents.
- When towing or transporting the vehicle, no passengers should be left in the vehicle.
- When towing the vehicle, ensure the air suspension is in service mode.