Seat Belt Checks, Maintenance and Replacement

Chapter 4 · Manual page 176

Seat Belt Checks

Split, worn or frayed seat belts may not function correctly in the event of a collision. They may be damaged during a collision. If the seat belt is split or worn, have it replaced immediately.

Ensure the red release button of seat belt buckle is always pointing upward or outward, so that seat belts can be unfastened rapidly in emergency.

Please follow the instructions below to check the seat belt warning light, seat belt, metal tab, buckle, retractor and fixing device regularly:

  1. Insert the seat belt metal tab into the corresponding buckle and pull seat belt webbing close to the buckle quickly to check that the belt clasp locks.
  2. Hold the metal tab and pull the seat belt forward quickly to check that the seat belt reel locks automatically, preventing the webbing from extending.
  3. Fully extract the seat belt and visibly examine for twists, fraying, splits or worn areas.
  4. Allow a fully extended seat belt to retract slowly to ensure continual and complete smooth operation.
  5. Visibly examine the seat belt for missing or broken components or components that may affect the normal operation.
  6. Ensure the seat belt warning light system is fully functional.
  7. If the seat belt fails any of the above tests or inspections, contact an After-sales Repairer immediately for repairs. Seat Belt Maintenance

Seat belt repairs and removal should only be carried out by an Authorised Repairer. The repair of a seat belt component must be carried out by the manufacturer trained, dealer technicians. In the event of accidents, improper maintenance may cause seat belt pre-tensioners not to be activated normally to increase accident injury risk. For a better guarantee of your safety, we recommend you to consult an Authorised Repairer.

Ensure no foreign or sharp objects become lodged in the seat belt mechanisms. Do not allow liquids or foreign objects to enter the seat belt buckle, since this could affect the proper engagement between the seat belt metal tab and buckle.

Seat belts should only be cleaned with warm soapy water. Do not use any solvent to clean the seat belt. Do not attempt to bleach or dye the seat belt, otherwise it may be weakened. After cleaning, wipe with a cloth and allow to dry. Do not allow the seat belt to fully retract before it is completely dry. Keep seat belts clean and dry. If there are contaminants accumulated in the retractor, the retraction of seat belt will be slow. Please use a clean and dry cloth to remove any contaminants. Seat Belt Replacement

Collision accidents may damage the seat belt system. The seat belt system may not be able to protect users after damage, which may result in serious injury or even death. After an accident, seat belts should be checked and replaced as needed immediately.

Seat belts may not require change after minor collisions. However, some other parts of the seat belt system, such as the metal tab, buckle, retractor, etc., may be deformed or damaged in the collision. Please contact an After-sales Repairer for repair or replacement of seat belt components.