Window Operation

The electric windows can be operated when the vehicle is powered on (Doors should be closed during operation). Press the switch (1-4) to lower the window, and pull up the switch to raise the window. Release the switch, the window will stop moving (unless in “one-touch” mode). “One-touch” Down The window control switches (1-4) for all doors are equipped with two positions; short press to the 2nd position, and the window will automatically fully open. When the window is moving down, its movement can be stopped at any time by operating the switch again. “One-touch” Up and Anti-pinch All window switches have the “One-touch” Up and “Anti-pinch” function. When short pressing the window control switch, the window will automatically ascend to close. Window movement can be stopped at any time by briefly operating the switch again during ascent. The “Anti-pinch” function is a safety feature which prevents the window from ascending and descends a preset distance automatically if an obstruction is sensed. Note: The front and rear windows can also be operated by individual window switches mounted on each door. The rear window switches will not function if the rear window isolation switch on the driver door has been activated. Rear Window Isolation Switch Press the switch (5) to isolate the rear window controls (an indicator lamp in the switch illuminates), and press it again to restore control. Note: It is recommended that you ISOLATE the rear window switches when carrying children. Note: Please operate the windows correctly to avoid danger, the driver must instruct the occupants on the use of windows and safety precautions. Note: If battery power is interrupted, or the motor fails during the window lifting/lowering process, the “One-touch” Up and “Anti-pinch” modes will be suspended. After vehicle power is restored, fully close the window with the window switch when the door is closed and then fully open the window continually pressing the switch for about 5 seconds. The “One0touch” Up and “Anti-Pinch” functions will be restored by pressing and holding the switch for about 5 seconds. The vehicle features an Automatic Window Closing during Vehicle Locking function, to ensure the safety of passengers and reduce any risk of occupants overheating, please ensure all passengers, especially children have exited the vehicle before activating this function.