Safety Instructions for Emergency Rescue
Chapter 7 · Manual page 302
- Please always observe the high-voltage safety precautions during rescue. The safety of rescue personnel and any by standers is priority.
- Vehicle components with high-voltage warning labels and orange harnesses are high-voltage components.
- Please always follow the safety requirements on the warning labels fitted to the high-voltage system.
- Work on high-voltage components must be performed by qualified personnel, and the operators must always wear suitably insulated personal protective equipment and use insulated tools.
- When working on high-voltage components, the high voltage must be disconnected by strictly following the operation instructions of “High Voltage Disconnection” in this Handbook to ensure safety before proceeding.
- Never damage the high-voltage battery pack when lifting the vehicle from below. Please take extra care to ensure that the floor is not damaged when using rescue tools.
- Regardless of the operations, care should always be taken with all high-voltage components, and cutting, squeezing or touching high- voltage components, failure to observe these instructions may cause severe injury or death.
Protective equipment Work on high-voltage components must be performed by qualified personnel, and the operators must be provided with the correct insulated personal protective equipment and use insulated tools.
| Insulating Protective Equipment and Insulating Tools | Illustration |
| --- | --- |
| Insulating gloves, withstand voltage 1kV |
|
| Insulating shoes, withstand voltage 18kV | 
|
Insulating tools, withstand voltage 1kV
Insulating pad, withstand voltage 10kV