Multi-Collision Brake System(MCB)

The MCB function will automatically apply the brakes to reduce the vehicle speed and improve the vehicle stability after a collision. It is designed to reduce the risk of a secondary collision caused by the uncontrolled movement of the vehicle after a collision. The MCB will be activated when the following conditions are all met at the same time:

• A vehicle collision where airbags are deployed;
• The vehicle speed is less than 37 mph (60 km/h);
• The steering wheel has not been turned in excess of 180° ;
• SCS is fault free.
• The accelerator pedal is not fully applied. If the driver presses the accelerator pedal firmly after the MCB function is triggered, the system will exit the braking state. Note: The MCB function cannot decelerate the vehicle in all cases of collision due to the fact that the collision process may cause some parts to malfunction or fail and affect the normal operation of the function.